Dini Argeo DGT1SX, Руководство пользователя

Страница: 36 / 60

36
Optimized layout for A4 print.
888888
DISAB
ENAB
888888 F.mode
A
funCt
1
rs.tare
5
loCk
unloCK
Disab
888888 F.mode
A
funCt
1
tare
5
USER_MAN_ENG_DGT1SX
MENU ACCESS: SAVING THE PARAMETERS:
Press the key during the start-
up procedure.
Press the
C
key several times, until the display shows
SAVE? . Press the key to confirm.
Complete menu
on pages
24 - 25
Predetermined tare
Clearing the tare
By holding down the key, or by means of the predetermined tare command, it is possible to enter a tare value manually.
For a moment the display shows “
-tm-
” and shows the tare present (or 0 if no tare is present).
Enter the tare value and press to confirm.
The tare can be cleared in different ways:
• By unloading the scale and performing a semi-automatic tare.
• By entering a predetermined tare value of 0.
• If the weight is negative, pressing the key.
Restoring the tare
Restoring tare disabled.
Restoring tare enabled. When restarting, the last tare in the memory
before turning off the power is restored.
Tare functions and parameters
Tare blocked. When the gross weight drops to 0, the tare remains
engaged.
Tare unlocked. When the gross weight drops to 0, the tare is cleared.
Tare disabled.
Tare mode
Semi-automatic tare
By pressing the key, or sending the tare command, the transmitter sets as tare the weight on the scale. For a moment the display shows
“
tare
” and then it shows 0 (net weight). The
3
light indicates that the net weight is shown on the display.
The semi-automatic tare cannot be performed if:
• The weight is less than one division.
• The weight is overloaded.