Dini Argeo DGT1SX, Руководство пользователя

Страница: 33 / 60

33
Optimized layout for A4 print.
i
f.mode
A
888888
Setup
B
ConfiG pre.Cal
1 1
Grav
3
USER_MAN_ENG_DGT1SX
LEGEND:
Indicates repeated pressing of
the key.
Parameter visible only
under certain conditions.
Parameter or menu subject
to approval.
Default value of the parameter.
This parameter allows you to correct the gravity acceleration value.
Before calibration, set the value of the calibration zone.
Next, set this value to the value of the zone of use.
Any difference between the two values will be automatically compensated.
EXAMPLE:
1. Before calibration, in the
GRAV
parameter enter the value
9.80390.
2. Calibrate the transmitter.
3. Before using the transmitter, in the
GRAV
parameter enter the
value 9.77623.
Calibration zone
Italy
g = 9.80390
Zone of use
Brazil
g = 9.77623
In the case of an approved transmitter, the value is read-only.
From
9.75001
to
9.84999
.
=
9.80390
.
Gravity