Dini Argeo DGT1SX, Руководство пользователя

Страница: 31 / 60

31
Optimized layout for A4 print.
f.mode
A
888888
Setup
B
ConfiG
1
pre.Cal
div.stb
Param stabil
1
6
2 1
F.Mode
A 888888
Setup
B
ConfiG
1
pre.Cal
1
Peak.fl Pk.lk.dv
Pk.lk.tm
Pk.div
Pk.bn.dv
Pk.time
9 1
2
3
4
5
param stabil
2 1
USER_MAN_ENG_DGT1SX
LEGEND:
Indicates repeated pressing of
the key.
Parameter visible only
under certain conditions.
Parameter or menu subject
to approval.
Default value of the parameter.
The value 0 disables the stability control.
By entering a value other than 0, you enable stability control.
Enter the number of deviation divisions beyond which the transmitter detects instability.
It is possible to decide that tare and zero functions (from keypad or serial command / PLC) are performed only if the weight is stable.
From 0 to 99.
= 02.
= 02.
Stability detection divisions
Anti-peak filter
The transmitter has an additional filter for the elimination of sudden weight peaks (e.g. shocks or falling material).
The following parameters, opportunely configured, allow you to eliminate the peak by blocking the weight for its entire duration.
The weight is blocked if it remains within the number of divisions set in
PK.LK.DV
for the time set in
PK.LK.TM
and is subsequently
unblocked if the weight deviates from the blocking value for a number of divisions greater than
PK.DIV
(or
PK.BN.DV
) or if the time set in
PK.TIME
has elapsed.