Dinamica Generale DG8000, Руководство оператора

Страница: 85 / 105

Use INDICATOR DG8000 RevB0
E
N
GL
IS
H
83
2
Press on the key.
A window asking you if you want to
copy (import) the data will appear.
Press ENTER to confirm or RESET to
cancel.
3
The transfer of data will next start.
Remove the card / USB key and close
the connector after the transfer if you
must not use it again.
Hardware Checkup of IRM System
1 Turn on the NIR system and check the correct communication with the indicator in
order to execute the scanner hardware check.
2
From total weight mode, press the key in order to go in the second page of
main menu.