Dimplex SF3202, Руководство по обслуживанию, Страница: 12 / 21

11
SF3202
If unit was operating prior to servicing allow at least 10 minutes for light bulbs and
heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the risk of
electric shock or damage to persons.
TO REPLACE LED/SWITCH HARNESS
1. Remove the firebox from the back of the mantel.
2. Remove the retaining screws on the top cover and remove the top being careful not
to damage any of the wiring.
3. Locate the LED/switch harness mounted on the inner panel and disconnect the
wiring clips and connections noting their original locations.
4. Depress the retainer clips on the rear of the switch and push the switch out of the
inner panel.
5. Properly orientate the new switch and connect all of the wiring clips and
connections.
6. Reassemble in the reverse order as above.