14
www.dimplex.com
Installation
Suspension Mounting
Suspension mounting is an option for lowering the heater from high ceilings. If the ceiling height is more than 105"
(2.7 m), it is recommended to lower the heaters to an ideal mounting height of 96" to 105" (2.4 m to 2.7 m).
Suspension can be done with chains or wires (ensure the wire/chain has a suitable load rating for the heater).
The wire or chain is connected to the lower part of the standard brackets (
Figure 13
). The brackets need to be
mounted onto a secure frame or wall with a minimum distance between the two brackets (
Figure 9, page 12
). When
completing the installation, ensure all screws are tight and unit is secure.
!
NOTE:
Chains or cables are not supplied with the heater, and are not available as optional accessories. Ensure
materials used are suitable for this application.
Figure 13
