background image

attention has to be given where children and 

vulnerable people are present.

If the mains lead is damaged, it must be replaced 

by the manufacturer or its service agent or a 

similarly  qualified  person  in  order  to  avoid  a 

hazard. 

Electrical connection

WARNING – THIS APPLIANCE MUST BE EARTHED

The use of an extension lead or multi-plug adaptor is not advised when 

connecting this product to the mains. Connection through these devices 

could lead to a risk of overloading, overheating and even fire at the extension 

lead or adaptor due to inadequate connection quality.

This heater must be used on an ~ supply only and the voltage marked on 

the heater must correspond to the supply voltage. This heater is fitted with 

a rewireable plug incorporating a 13 amp fuse. In the event of replacing 

the fuse in the plug supplied, a 13 amp fuse approved by ASTA to BS 1362 

must be used. If any other type of plug is used, a 15 amp fuse must be 

fitted in the plug, the adaptor, or at the distribution board.

IMPORTANT : If the plug is not suitable for your socket, the 13 amp plug 

should be removed. Before wiring the appropriate plug, please note that 

the wires in this mains lead are coloured in accordance with the following 

code : 

GREEN AND YELLOW: 

 

EARTH

 BLUE 

   NEUTRAL

 BROWN 

:   LIVE

Connect the 

GREEN AND YELLOW

 wire to the terminal marked ‘

E

’ or 

by the earth symbol   , or coloured 

GREEN

 or 

GREEN AND YELLOW

.

Connect the 

BROWN

 wire to the terminal marked ‘

L

’ or coloured 

RED

.

Connect the 

BLUE

 wire to the terminal marked ‘

N

’ or coloured 

BLACK.

Using the heater

WARNING: DO NOT USE THE HEATER UNTIL THE FEET OR WALL 

BRACKETS ARE FITTED CORRECTLY. 

The product can be used as an installed or portable unit. Once the desired 

application has been decided upon and the requirements below have been 

met the product is ready to be used. Simply plug in and switch on at the 

wall socket.

Please note – the element has been coated with a protective film which 

will burn off during the first few minutes of use and may cause a small 

amount of fuming. This is quite normal – the fumes are non-toxic and will 

quickly disappear. 
We recommend that you open a window to ventilate the room when using 

the heater for the first time.

Positioning the heater

Always ensure that the heater is stood on a firm, level base near to, 

but not directly beneath, a suitable mains supply socket. 

Ensure that curtains and furniture are not positioned close to the 

chosen position, as this would create a potential fire hazard.

We  recommend  that  the  heater  should  be  wall-mounted  in  rooms 

where children may be left unattended, see ‘Important Safety Advice’.

Important Safety Advice

WARNING:

 This appliance must not be used in 

a bathroom. 

WARNING:

 Do not use this heater in the 

immediate surroundings of a bath, a shower or 

a swimming pool.

WARNING:

 This heater must not be located 

immediately below a fixed socket outlet.

The heater carries a warning symbol to 

alert the user to the risk of fire that exists 

if the heater is accidentally covered.

WARNING:

 In order to avoid a hazard due to 

inadvertent resetting of the thermal cut-out, 

this appliance must not be supplied through an 

external switching device, such as a timer, or 

connected to a circuit that is regularly switched 

on and off by the utility.

This appliance can be used by children aged 

from 8 years and above and persons with 

reduced physical, sensory or mental capabilities 

or lack of experience or knowledge if they have 

been given supervision or instruction concerning 

the use of the appliance in a safe way and 

understand the hazards involved. Children shall 

not play with the appliance. Cleaning and user 

maintenance shall not be made by children 

without supervision.

Children of less than 3 years should be kept 

away unless continuously supervised. Children 

aged from 3 years and less than 8 years shall 

only switch on/off the appliance provided that 

it has been placed or installed in its intended 

normal operating position and they have been 

given supervision or instruction concerning 

the use of the appliance in a safe way and 

understand the hazards involved. Children aged 

from 3 years and less than 8 years shall not plug 

in, regulate and clean the appliance or perform 

user maintenance.

CAUTION:

 Some parts of this product can 

become very hot and cause burns. Particular 

Dimensions

(Millimetres)

Installation and Operating Instructions

Dimplex Convector Heater

Models : 

403BTB & 403BT

INDCUK40BT Issue  2

IMPORTANT : THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE

As with all portable heating appliances - This product is only suitable for well insulated spaces or occasional use

Fig. 1

Содержание 403BTB

Страница 1: ...ays ensure that the heater is stood on a firm level base near to but not directly beneath a suitable mains supply socket Ensure that curtains and furniture are not positioned close to the chosen position as this would create a potential fire hazard We recommend that the heater should be wall mounted in rooms where children may be left unattended see Important Safety Advice Important Safety Advice ...

Страница 2: ... NOTE When using the appliance or setting appliance controls always ensure that the heater is stood on a firm level base Do not tilt the appliance at any time Operational modes The electronic control has four control modes AUTO MANUAL BOOST and STANDBY mode Auto Mode Standby Mode Boost Mode Manual Mode In both MANUAL and AUTO mode there are three heat settings options Intelligent Eco Mode This is ...

Страница 3: ...d selected and the desired set temperature The time display will toggle between the current time and time remaining for the selected boost period Frost protection mode The appliance has a frost protection mode This setting is useful in areas such as garages to assist in the prevention of frost damage In Manual mode if the thermostat is set to its minimum setting 5 C the heater will cycle ON and OF...

Страница 4: ...erned about this we recommend that you contact the carpet manufacturer for guidance Alternatively either stand the heater on a suitable base to shield the carpet or wall mount it call our Helpline for further advice You may notice some parts of the element appearing to be hotter from time to time because of the variable airflow through the heater This does not cause a safety hazard The heat outlet...

Отзывы: