Dimplex 3VSHCE, Инструкция по установке и эксплуатации

Страница: 10 / 56

8 DOK4SVxxDEN · FD 9912 www.glendimplex.de
English Domestic ventilation unit M Flex Air (Plus)
5 Conversion
5.1 Transportation
A pallet should be used for transportation to the final installa-
tion location. The unit can also be transported horizontally with
the rear facing downwards.
The ventilation unit should be securely attached to the trans-
port pallet with a strap.
5.2 Opening the unit
To reach the inside of the unit, the bottom of the front panel
must first be removed:
1) Loosen the screw on the bottom
2) Push the front panel upwards slightly
3) Remove the front panel forwards
4) Loosen the 6x hexagon socket screws and remove the EPP
inspection door
!!
CAUTION!
To ensure that the unit is sealed air tight, the screws for the
front of the EPP casing must be screwed in by hand to a max.
tightening torque of 0.75 Nm.
5.3 Onsite conversion from right-
hand unit to left-hand unit
M Flex Air factory default, supply air fitting rear right.
For a description of the air connections see cap. 6.7.1 on
page 16
For a description of the condensate drain see cap. 6.3 and
Cap. 6.4 on page 13
2
1
3
4