7
6
5
4
ALL SEGMENTS DISPLAY OVERVIEW
REAR VIEW
C. MODE BUTTON
* Allows toggling between different display modes
(TIME, DST SETUP, TIME ZONE
ADJUSTMENT, RECEPTION MODE
SELECTION)
D. C
°
/F
°
BUTTON
* Selects the Indoor temperature display format in
Celsius or Fahrenheit.
E. BATTERY COMPARTMENT
*Accommodates one (1) CR2032 button battery.
F. UNFOLDING TABLE STAND SUPPORT
* Keeps the unit in an upright position on a flat surface.
TOP VIEW
G. UP (+) BUTTON
* Increases all function parameters
* Selects the date display format (date-month or
month-date)
* Activates
Single
or
Weekly Alarm
in
ALARM
mode
H. DOWN (–) BUTTON
* Decreases all function parameters
* Sets the language for the day of the week
* Activates the atomic time receiver
* Enables or disables any of the alarms
I. LOCK SWITCH
* Locks all operation buttons while traveling
preventing the battery drain
J. SNOOZE/LIGHT BUTTON
* Activates snooze function and EL backlight
B. ALARM BUTTON
* Allows toggling between
CLOCK
and
ALARM
display modes
* Enables or disables
WEEKLY
or
SINGLE
alarm
* Major country band pre-set
* Calendar displaying date with month
* User-selectable calendar format
* Indoor Temperature display in Celsius or Fahrenheit
* User-selectable 12 or 24 hour time format
* Day of the week display in English, German, French,
Italian, Spanish or Dutch
* Dual crescendo alarm with snooze
* Daylight Savings Time manual adjustment
* Enhanced Orange Backlight
* Low Battery Indicator
* Keyboard interlock
* Folded travel size or opened for desktop view
FRONT VIEW
A. MULTI-BAND ATOMIC TIME CLOCK
WITH INDOOR TEMPERATURE
B
A
h
d
i e
f
b
c
a
g
a. Time with seconds
b. Date in month/date or date/month format
c. Indoor temperature in
°
C or
°
F
d. RF reception type icon
e. Single Alarm icon
f. Weekly Alarm icon
g. Key lock indicator
h. RF reception strength indicator
i. Low battery indicator icon
GETTING STARTED
BATTERY INSTALLATION
* Open the battery compartment door.
* Install one CR2032 (3V) button battery matching the
polarity as shown in the battery compartment.
* Replace the battery compartment door.
ATOMIC TIME RECEPTION
Immediately after the battery installation, the clock will
beep once and display all available segments. Then the
unit’s receiver will start to automatically scan for any
available Atomic Time signal.
If the synchronization with the Atomic Clock time
signal is successful, the relevant world region will be
underlined and stay visible on the display.
C
E
D
F
J
I
G
H
SNOOZE
•
LIGHT
