handset_volume
integer (0-10)
Sets the handset volume, defaults to 5
headset_volume
integer (0-10)
Sets the headset_volume, defaults to 5
reset_call_volume
boolean
If 1, volume changes made during a call do not persist to the next call, defaults
to 0
default_ringtone
Tone ID from <tones> provided to
phone
Sets the default phone ringtone, defaults to Digium
active_ringtone
Tone ID from <tones> provided to
phone
Sets the current user-selected ringtone, defaults to Digium
Preferences (Answering Calls)
headset_answer
boolean
Sets whether to use the headset, rather than the speaker, for answering all calls, defaults to 0
Contacts
desi_strip_enable
boolean
Applies to D50 and D70 models, enables / disables sidecar, defaults to 1
enable_blf_on_unused_line_keys
boolean
If 1, assigns BLFs beginning with first empty line key. If 0, assigns BLFs
beginning with first sidecar key. Defaults to false.
name_format
first_last, last_first
Formats the display of contact names, defaults to first_last
contacts_max_subscriptions
integer (0-40)
Sets the maximum number of subscriptions for presence indications - 0 disables
presence subscriptions. Defaults to 40
blf_contact_group
Any Group ID from the
loaded contacts
The ID of the contact list group to use for the rapid dial list
Network (IP Settings)
network_enable_dhcp
boolean
Disable or Enable DHCP network configuration, defaults to 1
network_static_ip_address
IPv4 address
Defines the network address for the phone
network_subnet_mask
IPv4 netmask
Defines the netmask for the phone
network_default_gateway
IPv4 address
Defines the network gateway for the phone
network_primary_dns_server
IPv4 address
Defines the primary DNS server for the phone
network_secondary_dns_server
IPv4 address
Defines the secondary DNS server for the phone
Network (Virtual LAN)
network_vlan_discovery_mode
of NONE, MANUAL, LLDP;
value
as IP mask
network
Sets use of none, manual, or LLDP discovered VLAN and, if MANUAL,
defines the network; defaults to LLDP
network_vlan_qos
integer (0-7)
Sets the VLAN QOS level
network_vlan_id
integer (0-4095)
Sets the VLAN ID
Logging
log_level
error, warning, debug, info
Sets the logging level, defaults to error
log_server
IPv4 address of syslog server
Specifies remote syslog server
log_port
port as integer
Specifies port of remote syslog server
enable_logging
boolean
Disables or Enables remote syslog, defaults to 0
Miscellaneous