10
6.3 Connect Computer (NIC) to the Switch
Please insert the NIC into the computer, after installing network card
driver, please connect one end of the twisted pair to RJ-45 jack of your
computer, the other end will be connected to any RJ-45 port of the
Switch, the distance between Switch and computer is around 100 meters.
Once the connection is OK and the devices are power on normally, the
LINK/ACT/Speed status indicator lights corresponding ports of the Switch.
6.4 Switch connection to the PD
1-24 ports of the Switch have PoE power supply function, the maximum
output power up to 30W each port, it can make PD devices, such as
internet phone, network camera, and wireless access point work. You
only need to connect the Switch PoE port directly connected to the PD
port by network cable.
CE Mark Warning:
This is a Class A product. In home environment, this
product may cause radio interference. In this case, the user may be
required to take appropriate measures.
Hereby Assmann Electronic GmbH, declares that the Declaration of
Conformity is part of the shipping content. If the Declaration of
Conformity is missing, you can request it by post under the below
mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany