Connect to Wireless Access Point
Using Configuration Utility to Connect to Wireless Access Point
1. After installation is complete,
wireless configuration utility will be
shown as an icon at the lower-right
corner of your windows desktop.
Please click the icon by right mouse
key, and select ‘
Launch Config
Utilities’
.
2. Configuration utility will scan for
wireless access points automatically,
and all found access points will be
displayed. Please select an access
point you wish to connect, and click
‘
Connect’
.
If the wireless access point you want to
connect does not show here, please
click ‘
Rescan’
3. You’
ll be prompted to input the SSID
(the name of wireless access point) if
the SSID of the access point you want
to connect is hidden, then click ‘
OK’
.
The SSID you input here must be
identical to the SSID setting of the
wireless access point you want to
connect.
