Digitus DN-7042-1, Руководство пользователя

Страница: 11 / 38

11
/
38
Data encryption
Select the data encryption type from drop-down
menu. This setting must be identical with the setting
of wireless access point you with to connect.
ASCII / PASSPHRASE
When the encryption type is ‘WEP’, it’s required to
input a set of ‘passphrase’ to connect to wireless
access point. Check ‘ASCII’ or ‘PASSPHRASE’
depends on the security setting of access point,
and input it in the box; if you select ‘PASSPHRASE’
you also need to select the length of the key.
The passphrase must be identical with the setting
of wireless access point you with to connect.
Key index
Select WEP key index. For most of access points
you can select ‘1’, but please refer to the setting of
the access point.
Network key / Confirm
network key
When the encryption type is ‘WPA’ or ‘WPA2-PSK’,
it’s required to input a set of ‘passphrase’ to connect
to wireless access point. Please input the same
passphrase in two boxes for confirmation.
EAP TYPE / Tunnel /
Provision Mode
When authentication type is any of 802.1X, you
have to select EAP type, tunnel, and provision
mode from dropdown menu. This setting must be
identical with your 802.1x authentication server.
Username / Identity /
Domain / Password Please input 802.1x related authentication
information here.
Certificate
If certification is required to authenticate with
802.1x authentication server, please select a local
certificate from dropdown list.
PAC
Check this box and PAC (Privilege Access
Certificate) will be automatically selected.
Please click ‘ OK ’ when ready.
5. Network card will attempt to connect to access point now, this may
require few seconds to minutes, please be patient. When the ‘ Status ’ become
‘ Associated ’ , your computer is connected to access point you selected. Click
‘ Close ’ to close configuration menu.