Digitus DA-71814, Руководство пользователя, Страница: 3 / 9

Features
•
Digital 2.4GHZ, high-quality image compression
•
Wireless ideal distance 3M-5M
•
Working current about 80mA
•
Built-in battery 600mA/3.7V
•
It can work for about 6 hours after it is fully charged
•
COMS sensor, 300, 000 Pixels (640X480)
•
USB interface for charging
•
Built-in MIC.
•
Support XP/VISTA / 7 System, it can be of avail once it is inserted.
•
Support MSN/QQ/SKYPE Video Communication
•
Frame rate: 320X240, it can reach about 10 frames within 5m,
640X480, it can reach about 7 frames within 5m.
•
Support snapshot function
•
Adjustable of brightness, contrast and saturation is available
•
Software interpolation 5M (2560x1920)
System requirements
* PC or laptop with USB interface.
* Pentium 200 or higher CPU.
* Windows XP/VISTA System Software.
* Free space of over 20MB.
* CD—ROM Driver.
* Usable memory of over 32MB.
* Support DIRECTX VGA Display Card.
Code-matching
When conducting code-matching, insert USB receiver into the computer. At this moment, the red light
is on. Please press the key of the receiving terminal and release it until the red light of the receiving
terminal flickers. At the moment, switch on the power supply for the transmitting terminal, the red light
is on. Please press the key of the transmitting terminal until the red light of the receiving terminal stops
flickering. It indicates the code-matching is finished. At this moment, it is feasible to use
CamApp to
open the image ( CamApp is available only after the driver is installed). The red light of the receiving
terminal and the transmitting terminal will flicker for 5 times each second after the image is opened. If
code-matching for a second time is initialized, please operate following the same code-matching
method.
Charging
When it is in charging status, the green light of the USB wireless webcam is on. The green light of the
webcam will be off after the charging is completed. When voltage of the battery is lower than the
working voltage, the flickering of the red light will be extremely fast (about 20 times each second). At
this time please give the charging cable to the camera. When it is to be charged, only by inserting the
USB power cord into another side of the computer, the charging of the camera will begin. The time for
charging shall cover about 3 hours. It can work for 6 hours after one charging is completed.