Digitus Biometrics dbServerRackV2 Zero-U, Руководство пользователя и инструкция по установке

Страница: 6 / 24

Model: db ServerRack V2 Zero-U Digitus Biometrics, Inc. 2011
Page 6 of 24
Mounting the Door Interface Box – Step 2
•
Attach the Door Interface Box to the inside door surface. Only apply a slight amount of pressure to the high bond
tape until you have ensured that the Door Interface Box will not prevent the cabinet door from closing.
•
Once you have ensured that the door will close properly and the finger sensor can attach to the lock, apply more
pressure to the high bond tape. The more pressure applied, the greater the bond.
Figure 5
* Open slot for lock. 25mm x 150mm (typical)
IMPORTANT:
Ensure that the Interface Box is located
close enough to the lock opening in the
door, so that the finger-sensor on the
ribbon cable can go through the door
and connect into the lock, see Figure 6.