© 2020 Digitrax, Inc.
www.digitrax.com
— 1 —
Features:
▪
LocoNet makes it easy to add UR93 Duplex Radio support to your layout.
▪
Provides a Full Duplex radio link to/from the layout with compatible Digi-
trax Duplex Equipped Throttles.
▪
FCC Part 15.247 Certified, Class B RFI.
Parts List
1 UR93 Duplex Transceiver
1 2’ LocoNet cable
1 PS14 Power Supply
1 Instruction Sheet
UR93 Installation / Quick Start
The UR93 is simple to install and begin using on your LocoNet layout.
1.
It is recommended the UR93 be placed near the physical center of a layout.
2.
Connect the PS14 DC power supply to your UR93 via the DC power jack.
Plug the PS14 into an AC wall outlet. The green and red LEDs will blink.
3. Connect the UR93 to your working LocoNet system using one of the RJ12
jacks at the rear of the UR93. The red LED will go on and the GREEN
ID
LED will blink at about 2-second interval to indicate that it is working.
4.
If there are more UR93 or UR92's added to the layout, use a throttle to turn
track power OFF and then back ON. This will match Duplex Group Names.
That’s all that’s required for installation of your UR93 on LocoNet!
UR93
Complete Train Control
Run Your Trains, Not Your Track!
Duplex Transceiver
For Duplex
Equipped LocoNet Throttles
EZ
RTS
D C S 2 1 0 +
R
L O C O N E T
A
B
R
C
PWR PROG NET
TRAC K
STATUS
MODE
RU N
OP
SLEEP
SCALE
O/G
N
HO
+
P
A
G
R
P
B
R
B
R
A
5A
LOCO
RESET
-
8A
UR93
C
omplete
T
rain
C
ontrol
P S 6 1 5
P S 1 4
8 5 - 2 4 0 V A C
8 5 - 2 4 0 V A C
E
D
F
P r o g r a m
T r a c k
M a i n l i n e
T r a c k s
DT602D
I E C C o r d s e t
B o o s t e r
G r o u n d t o
o t h e r b o o s t e r s
LocoNet
compatible
command station
Duplex
compatible
throttle