DigiTrak Falcon F1 Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 80

background image

D

IGITAL

C

ONTROL

I

NCORPORATED

2

DCI Standard Warranty

DCI may make changes in design and improvements to products from time to time. DCI shall have no obligation to upgrade any previously
manufactured DCI product to include any such changes.

THE FOREGOING IS THE SOLE WARRANTY FOR DCI PRODUCTS (OTHER THAN THE 5-YR/750-HR EXTENDED WARRANTY FOR
FALCON 15/19” TRANSMITTERS). DCI DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IMPLIED
WARRANTY OF NON-INFRINGEMENT, AND ANY IMPLIED WARRANTY ARISING FROM COURSE OF PERFORMANCE, COURSE
OF DEALING, OR USAGE OF TRADE, ALL OF WHICH ARE HEREBY DISCLAIMED.

In no event shall DCI or anyone else involved in the creation, production, sale or delivery of the DCI product (“partners”) be liable for any damages
arising out of the use or inability to use the DCI product, including but not limited to indirect, special, incidental, or consequential damages, or for
any cover, loss of information, profit, revenue or use, based upon any claim for breach of warranty, breach of contract, negligence, strict liability, or
any other legal theory, even if DCI has been advised of the possibility of such damages. In no event shall DCI or its partners’ liability exceed the
purchase price for the product.

This warranty is not assignable or transferable. This warranty is the entire agreement between DCI and purchaser, and may not be expanded or
amended in any way other than in writing by DCI.

Product demonstrations

DCI personnel may be present at a job site to demonstrate basic usage, features, and benefits of DCI products. DCI personnel are present only to
demonstrate a DCI product. DCI does NOT provide locating services or other consulting or contracting services. DCI does not assume any duty to
train the user or any other person, and does not assume responsibility or liability for the locating or other work performed at a job site at which DCI
personnel or equipment are or have been present.

«
...
78
79
80

Содержание Falcon F1

















































































Отзывы:

Нет отзывов

Похожие инструкции для Falcon F1

Бренд: B meters Страницы: 2

Бренд: Bamo Страницы: 8

Бренд: Cannon Страницы: 64

Бренд: Cannon Страницы: 73

Бренд: Hameg Страницы: 44

Бренд: Hameg Страницы: 60

Бренд: Hameg Страницы: 28

Бренд: HAMAR LASER Страницы: 113

Бренд: ICM Controls Страницы: 8

Бренд: Make Noise Страницы: 15

Бренд: Major tech Страницы: 40

Comark Diligence 600

Бренд: Fluke Страницы: 61

Бренд: Lutron Electronics Страницы: 20

Бренд: Rion Страницы: 4

QI-POWER-485-300-LV

Бренд: QEED Страницы: 2

Бренд: ICP DAS USA Страницы: 4

Бренд: G4M Страницы: 52

83620B 8360 Series

Бренд: Agilent Technologies Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды