Model
Range Square Drive Weight
DWA-2501 250.0 in-lb
1/4inch
1.5 pound
DWA-1002 100.0 ft-lb
3/8 inch
2.2 pound
DWA-2503 250.0 ft-lb
1/2 inch
3.4 pound
Display
:
5-digit, alpha-numeric LCD with function and
battery indicator icons.
Accuracy
:
Torque:
within
±1% of Indicated Value of both CW
and CCW directions. (10%-100% of F.S)
Angle:
within ± 1° when rotating to 90° at the
speed rate @ 2°/s to 400°/s
Calibration:
should be performed once a year or every
15,000 cycles which ever comes first.
Resolution:
Units of measure
:
ft-lb, in-lb, Nm
Modes of measure:
Peak Hold, Angle
Measurement Modes:
ANGLE
- 15 seconds display of peak Angle.
Minimum 5% of full scale torque apply before Angle
start measurement.
Example: Model DWA-1002 full scale is 100ft-lb
5% of F.S is 5 ft-lb. when torque reached
Above 5 ft-lb. Angle will start measure.
TORQUE
- Display torque value in real time when torque is
loading and display peak torque when released
Visual, Audible Alerts:
Yellow
LED and buzzer pulse at 80% - 96% of target torque.
Pulse rate increases as target torque is approached.
Green
LED and buzzer on continuously when applied torque
is within 96% - 104% of target torque.
Red
LED and buzzer on continuously when applied torque
exceeds >104% target torque or wrench full-scale.
Tactile Vibration
when applied torque is within ±4% of
target torque.
Battery Power:
2 AA battery up to 200 hours of continuous operation
Certification:
This device is calibrated at the factory and is certified to meet
International Standards. ISO-6789-2003 and ASME B107-28-
2005 standards compliant. Certificate of N.I.S.T. (National
Institute of Standards Technology). Traceability from 10% to
100% of full scale
.
Maintenance:
To clean the wrench, wipe with a lightly dampened cloth.
DO NOT use: solvents, thinners or engine cleaners. DO NOT
immerse in any liquids. It is highly recommended that your
Torque & Angle Wrench be calibrated once a year or every
15,000 cycles, whichever comes first. Contact Digitool Solutions
representatives for repair and calibration services.
Warranty Service and Recalibration
Digitool Solutions provides a 1 year warranty that covers any
Digital Torque & Angle Wrench which fails to give satisfactory
service due to defective workmanship or materials (excluding
calibration) for 12 months from the date of original purchase.
Calibration is only covered by this warranty for each new unused
Torque & Angle Wrench out of box. Products must be returned
with proof of purchase, freight prepaid, to the warranty service
center listed below.
This warranty excludes Torque & Angle Wrench that have been
subjected to abnormal use, accidental damage, neglect, or lack of
maintenance. Any modification or disassembly of this Torque &
Angle Wrench or repair by an unauthorized service center will
void the warranty. This warranty gives you specific rights. You
may also have other rights which vary from state to state. The
foregoing obligation is Digitool Solutions sole liability under this or
any implied warranty and under no circumstances shall Digitool
Solutions be liable for any incidental or consequential damages.
Note:
Some states do not allow the exclusion or limitation of
incidental or consequential damages so the above limitation or
exclusion may not apply to you.
For Warranty Service and Recalibration/Certification
Services, contact:
Ratchet head:
1/4” , 3/8” or 1/2” drive 36 teeth
Accuracy:
Torque. ±1% CW & CCW
From 10%-100% of Full scale
Angle. ±1° of 90° rotation
@ speed rate 2°/s - 400°/s
Display:
5-digit, alpha-numeric LCD
With functions, units and
battery indicator icons.
Indicators:
LED Green, Yellow and Red
Buzzer, Vibrator
Power:
Manual/Auto shut off after
5 minutes Idle
Battery:
2 AA size Battery Regular Alkaline
up to 200 hours of continuous operation
Rev.Dec. 2014
Model
Drive
ft-lb
in-lb
Nm
DWA-2501
1/4 inch
0.01 ft-lb
0.1 in-lb
0.01 Nm
DWA-1002
3/8 inch
0.1 ft-lb
1 in-lb
0.2 Nm
DWA-2503
1/2 inch
0.2 ft-lb
1 in-lb
0.3 Nm
Specifications:
Digitool Solutions LLC,.
13905 Ramona Ave. Unit #A
Chino, CA 91710
Phone: (909)591-9581
Fax (909) 233-6491
Website: digitoolsolutions.com
USER’S GUIDE
ELECTRONIC TORQUE ANGLE
WRENCH
TORQUE, ANGLE INDICATOR
For Models
DWA-2501, DWA-1002,
DWA-2503