DIGITIZE DGM-32/64, Руководство по установке и обслуживанию

Страница: 46 / 59

DGM INSTALLATION AND MAINTENANCE MANUAL
36 700135-0000 Rev. O
4.3.30 FUNCTION 29 (ADDITIONAL ZONES)
This function allows you to program additional zones to follow the keypad zone
status. This is useful if you have infrared detectors or motion sensors within a
keypad detected zone. By using the keypad for entrance, the DGM will automatically
disable reporting the interior zones when the keypad zone is disarmed. Resetting
the keypad will automatically activate interior zones.
To view or change Function 29, press
“29”, then FUNC or, if you are viewing the
previous function, just press FUNC. The second line of the display
will read “29 -
Keypad Zones.” A message will scroll on the first line:
Assign additional zones to follow keypad arm and disarm states.
Use the READ button to select the zone to assign. Enter the Remote
Keypad (0-15) for selected zone to follow then press the ENTER
button. The IN/OUT button will change all of the zones in the panel
at one time. Press CLR/SIL to clear display or FUNC to view next
Function.
Press CLR/SIL to clear the display or FUNC to advance to the next function.
4.3.31 FUNCTION 30 (LINK DOWN DELAY)
This function sets the amount of time delay between the moment the System 3505
Prism Lx last polls the DGM to when the System displays a Data Link Down and the
DGM displays DATA LINK DOWN on its LCD display. The default for this function is
15 seconds. The value can range between one to 255 seconds.
To view or change Function 30, press “30”, then press FUNC or, if you are viewing
the previous function, ju
st press FUNC. The second line of the display will read “30 -
Link
Down Delay.” A message will scroll on the first line:
Link down delay time is 016 seconds. Enter the new value, then
press ENTER. Delay can be set from 1 to 255 seconds. Default is 15
seconds. Press CLR/SIL to clear display or FUNC to view next
Function.
Press CLR/SIL to clear the display. Press FUNC to advance to the next function.
4.3.32 FUNCTION 31 (STACK LINK DELAY)
If the Event Log Option is activated, the Stack Link Delay time determines how long
the DGM should wait (from last System 3505 Prism Lx zone) to start saving events.
Default time is one minute. In place of DATA LINK DOWN the display will indicate
STORING EVENT when it detects the link is down.
To view or change Function 31, press “31”, then press FUNC or, if you are viewing
the previous function, just press FUNC. The second line of the dis
play will read “31 -
Stack
Link Delay.” A message will scroll on the first line:
Event Stack link down delay is 060 seconds. Enter the new value,
then press ENTER. The Data link delay can be set from one to 255
seconds. Default is 60 seconds. Press CLR/SIL to clear display or
FUNC to view next Function.
Press CLR/SIL to clear the display. Press FUNC to advance to the next function.