DigiTech RP80, Руководство пользователя

Страница: 19 / 32

Pickup/Wah Type - The Value buttons select the Pick Up or Wah type that is simulated.
OF
- Turns the Pickup Simulator / Wah module off.
SH
- Gives a single coil pick up the warm tone of a humbucker.
HS
- Gives a humbucker the unique sound of a single coil.
Cr
- Cry Wah is a traditional sounding Wah.
bo
- Boutique Wah is a wider sweeping Wah with a more modern sound.
Fr
- Full Range Wah sweeps the entire spectrum of audible frequencies.
Compressor
A Compressor is used to automatically limit the dynamic level of the guitar signal.
1
to
15
- Controls the amount of compression (ratio and sustain) and ranges
from 1 (slight compression) through infinity (maximum sustain) or turns the
compression effect off.
Amp/Cabinet Modeling
Amp Modeling is a technology that applies the tones of several popular modern and vintage
amps and acoustic guitar simulation. Values 1-9 increase the amp’s gain and level.
Any trademarks are the property of their respective companies and are in no way associated with DigiTech.
b1-b9
- Based on a Blackface
o1-o9
- Based on Boutique
r1-r9
- Based on a Rectifier
H1-h9
- Based on a Hot Rod
t1-t9
- Based on a Classic Tweed
C1-C9
- Based on a British Combo
c1-c9
- Based on a Clean Tube amp
s1-s9
- Based on a British Stack
U1-U9
- A nice crunchy tube combo
G 1- g 9
- Based on High Gain tube amp
F1-f9
- A vintage fuzz distortion
AC
- A flat top acoustic guitar
15