For product support please see www.digitalyacht.co.uk
Page 5
AIT2000 Installation & Operation Manual
VERSION 1.01
1.5
Warranty
The AIT2000 is supplied with a standard 2 year return to base warranty as defined in the accompanying warranty
information. Any attempt to tamper with or damage this product will invalidate the warranty. Physical damage
and damage caused by salt water ingress are not covered under this warranty.
1.6
Disposal of this product and packaging
Please dispose of the AIS transponder in accordance with the European WEEE Directive or with the applicable lo-
cal regulations for disposal of electrical equipment. Every effort has been made to ensure the packaging for this
product is recyclable. Please dispose of the packaging in an environmentally friendly manner.
1.7
Accuracy of this manual
The AIS transponder may be upgraded from time to time and future versions of the AIS transponder may there-
fore not correspond exactly with this manual. Information contained in this manual is liable to change without
notice. The manufacturer of this product disclaims any liability for consequences arising from omissions or inac-
curacies in this manual and any other documentation provided with this product.
1.8
Declaration of conformity
Digital Yacht declare that this product is in compliance with the essential requirements and other provisions of
the R&TTE directive 1995/5/EC.
The product carries the CE mark, notified body number and alert symbol as required by the R&TTE directive.
The AIT2000 is intended for sale in the following member states: United Kingdom, France, Spain, Sweden, Austria,
Netherlands, Portugal, Denmark, Norway, Belgium, Italy, Finland, Ireland, Luxembourg, Germany and Czech Rep.
1.9
FCC notice
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accord-
ance with the instructions, may cause harmful interference to radio communications.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
WARNING: It is a violation of the rules of the Federal Communications Commission to input an MMSI that
has not been properly assigned to the end user, or to otherwise input any inaccurate data in this device.
