Digital Watchdog MEGApix DWC-MT95WiATW, Руководство пользователя, Страница: 27 / 61

23
2. Click “Enable” and set the alarm holding time.
3. Trigger alarm out. When the camera is disconnected, the system will trigger
the alarm out.
5.3.3 Alarm In
This function is available for cameras with alarm input support. To set sensor
alarm (alarm in):
Go to Config > Alarm > Alarm In interface as shown below.
1. Click “Enable” and set the alarm type, alarm holding time and sensor name.
2. Set alarm trigger options. The setup steps are the same as motion detection.
Please refer to the
motion detection chapter for details.
3. Click the “Save” button to save the settings.
4. Set the schedule of the sensor alarm. The setup steps of the schedule are the
same as the schedule recording setup. (See
Schedule Recording ).
5.3.4 Alarm Out
This function is only available for some models. Go to Config > Alarm > Alarm
Out.