DW E.S.T. (Elevated Skin Temperature) System
-22-
8.6. Top Navigation Bar
The top navigation bar, located on the top of the window in orange, includes the settings for Monitor Selection,
Software Settings, and Exit the software.
The software settings popup window includes the following settings:
<General Software Settings>
Setting
Description
Automatic storage
path
Specify the path where JPEG files are saved.
The default path is: C:\Program Files(x86)\DW\Output\
Face detection path
Specify the path where JPEG files saved when a face is detected
The default path is: C:\Program
Files(x86)\DW\Output\FaceDetection\YYYYMMDD\
Alarm storage path
Specify the path where JPEG files are saved when an alarm is triggered.
The default path is C:\Program Files(x86)\DW\Output\Alarm\YYYYMMDD\
Temperature type
Set the temperature format to Celsius (°C) or Fahrenheit (°F).
Date format
Select the date and time format from the available options: YYYY/MM/DD,
MM/DD/YYYY, or DD/MM/YYYY.
Automatic face
detection storage
Enable to save images automatically when faces are detected.
Blurring except
detected faces
Enable blurring for areas other than the face. When enabled, people’s bodies
are blurred out, keeping only the face clear and detectable.
Blur treatment
method
Blurring mode can be set to two options:
Only when a face is detected and Always.
Blur treatment level
Adjust the level of blurring treatment from 5 to 15. The smaller the number, the
lower the intensity of the blur treatment.
Left and right
inversion
Flip the camera’s view horizontally. If enabled, a camera reboot is required to
apply the settings.
Top-down inversion
Flip the camera’s view vertically. If enabled, a camera reboot is required to
apply the settings.
