DW E.S.T. (Elevated Skin Temperature) System
-13-
To change your Blackbody selection, press the "
Model Reset
" button in the top-right of the launch screen.
The pop-up window below will appear. Click “
Yes
” to enter the Blackbody setup screen.
Once the thermal camera is connected to the PC via an Ethernet cable, and the visible camera is connected
to the PC via the included USB cable, the following screen will show all the cameras currently connected to
the monitoring PC.
If the thermal camera is not listed:
1. Check the network setup status.
2. Check the LAN cable is connected properly to the camera and the PC.
3. Make sure the Wi-Fi on the PC is disabled.
4. Reboot the PC and the camera.
If the visible camera is not on the list:
1. Check the USB 3.0 cable is properly connected to the PC.
2. Check if the camera through the Windows “Camera” application.
Click on the thermal camera button to access the camera’s view. The number of thermal camera icons
available will reflect the number of cameras connected to the monitoring PC.
Once the camera is selected, the software runs the initialization process.
※
When the program starts, "
Initializing...
" is displayed in the upper left temperature display section, until
initialization is complete.
