Quick Start Guide
Quick Start Guide
WHAT’S IN THE BOX
Hex Allan
wrench
1
Mounting
template
1
DC plug
cable
1
Screws
and plastic
anchors
(4pcs)
1 set
Test video
cable
1
Moisture
absorber
and
absorber
guide
1 set
Sunshield
cover and
adjusting
screws
1 set
Quick setup
guide
1
Pass the wires through the mount bracket and make all necessary connections. Connect the BNC cable and power cables to the camera.
STEP 1 – PREPARING TO MOUNT THE CAMERA
STEP 2 – CABLING THE CAMERA TO EXTERNAL DEVICES
Power requirements
Power consumption
DC12V/AC24V dual voltage
DC12V (LED off): 5.49W (457mA)
DC12V (LED on): 8.34W (692mA)
AC24V (LED off): 4.95W (346mA)
AC24V (LED on): 7.81W (540mA)
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours:
9:00 AM – 8:00 PM EST, Monday through Friday
digital-watchdog.com
DWC-B6883WTIR
Torx Wrench
DC Plug Cable
Test Video Cable
Manual
Template Sheet
Screw &
Moisture absorber &
Absorber Guide
Sunshield cover &
Torx Wrench
DC Plug Cable
Test Video Cable
Manual
Template Sheet
Screw &
Moisture absorber &
Absorber Guide
Sunshield cover &
Torx Wrench
DC Plug Cable
Test Video Cable
Manual
Template Sheet
Screw &
Moisture absorber &
Absorber Guide
Sunshield cover &
Torx Wrench
DC Plug Cable
Test Video Cable
Manual
Template Sheet
Screw &
Moisture absorber &
Absorber Guide
Sunshield cover &
Torx Wrench
DC Plug Cable
Test Video Cable
Manual
Template Sheet
Screw &
Moisture absorber &
Absorber Guide
Sunshield cover &
Torx Wrench
DC Plug Cable
Test Video Cable
Manual
Template Sheet
Screw &
Moisture absorber &
Absorber Guide
Sunshield cover &
Torx Wrench
DC Plug Cable
Test Video Cable
Manual
Template Sheet
Screw &
Moisture absorber &
Absorber Guide
Sunshield cover &
Please cut the card type absorber along
a dotted line, overlap and attach them
according to the direction of the arrow.
Please cut the card type absorber along
a dotted line, overlap and attach them
according to the direction of the arrow.
Attention: This document is intended to serve as a quick reference for the
initial setup. It is recommended that the user read the entire instruction
manual for complete and proper installation and usage.
NOTE:
Download all your support materials and tools in one place.
1. Go to:
http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in
the
‘Search by Product’
search bar. Results for
applicable part numbers will populate automatically
based on the part number you enter.
3. Click
‘Search’
. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
1. The mounting surface must withstand five times the weight of your camera.
2. Do not let the cables get caught in improper places or the electric line cover can be damaged. This may cause a short or fire.
3. Install the moisture packet in the base of the camera’s lens.
a. Remove the moisture absorber from the packaging.
b. Cut the card and folder along the dotted line.
c. Place the moisture absorber behind the camera’s lens module. See the drawing for more information.
4. Using the mounting template sheet or the camera itself, mark and drill the
necessary holes in the wall or ceiling.
