O v e r v i e w
P E R F O R M A N C E S P E C I F I C A T I O N S
Brightness (±10%)
sx+ 3D L & P: 6,000 ANSI Lumens
sx+ 3D L & P Ultra Contrast: 3,000 ANSI Lumens
sx+ Dual 3D: 11,000 ANSI Lumens
sx+ Dual 3D Ultra Contrast: 5,500 ANSI Lumens
Mechanical Orientation
• “P” models support portrait and 360˚ of roll
• “L” models support 360˚ of pitch (lens up/down)
Contrast Ratio
(±10%)
Standard Models - 2000:1
Ultra Contrast Models - 4000:1
Display Type
3 x .95” Dark Chip 1080p DMD™ with
Fast Transit Pixels for smooth
greyscale and improved contrast
DMD Specification
1400 x 1050 pixels native, 12˚ tilt angle
Fill Factor
90%
Sealed Optics at DMD™ Interface
Protects DMD’s™ from optical contamination
Source Compatibility
• Composite, s-video, and color difference
video standards up to 1080i
• RGB graphics standards up to 1920 x 1200
• DVI standards
• High definition RGB and color difference
standards
• High definition / standard definition serial
digital formats (SD/HD-SDI)
Video Processing
• Enhanced 7 point color correction
• Dual Flash Processing™ increases 60 Hz inputs to
120 Hz displayed output
• FastFrame™ Motion Blur Reduction
• Xenon Color Mode - User selectable notch filter and
xenon-color mode processing, enable the projector
to replicate xenon lamp spectral performance
• Class leading Video de-interlacing/processing of SD
and HD sources using auto 3:2 and 2:2 extraction,
ruggedized for editing discontinuities
• Pixel-based motion adaptive interpolation
• User selectable preset, parametric
de-gamma and user downloadable de-gamma
• Frame Delay: as low as 1 frame, source dependant
• Auto mode selection - plug and play setup
Specifications subject to change without notice DP V3.0 04/2011 ©2011 Digital Projection, Inc.
™DLP, Digital Light Processing and DMD are trademarks of Texas Instruments, Inc.
TITAN 3D Pro Series II
T I T A N s x + 3 D - L • T I T A N s x + 3 D - P • T I T A N s x + 3 D - L U C • T I T A N s x + 3 D - P U C • T I T A N s x + D u a l 3 D • T I T A N s x + D u a l 3 D U l t r a C o n t r a s t
High Bandwidth Input
• 3D capable
• Pixel Mapped - with low latency
• FastFrame™ Motion Blur Reduction
• 120 Hz with no frame doubling
3D Sync
Sync In - External lock
Sync Out - Shutter glass control
Network Connection
LAN via RJ 45, Wireless 802.11b,
full protocol feature set
Lamp Type
Single or Dual High Intensity Discharge module
Lamp Life
(typical)
1
2000 hours per lamp, dual lamp models
provide 4000 hours sequential lamp operation,
lamp low provides extended lamp life
Lens Mount
Zoom Lenses: Motorized horizontal and vertical
lens shift, zoom and focus
Fixed Lenses: Manual Focus
Lens Shift (maximum)
Fixed 1.2:1 and Zoom Lenses:
• Vert: +0.5, -0.4 frame; Hor: ±0.2 frame
0.73 Fixed lens:
• Vert: ±0.11 frame; Hor: ±0.07 frame
Lens Options
0.73
:1 fixed
2.02-2.77 :1 zoom
1.2
:1 fixed
2.77-4.51 :1 zoom
1.26-1.61 :1 zoom
4.51-7.53 :1 zoom
1.5-2.02 :1 zoom
7.5-11.2
:1 zoom
• 1.2:1 Lenses include manual aperture
• High-contrast lenses available for 0.73:1
and all zoom lenses
Mechanical Mounting
• Front or rear table; Front or rear ceiling
(ceiling mount optional)
• Rugged, staging tolerant chassis with
integrated handles
• Optional RapidRig™ frame with integrated
pitch, roll and yaw adjustments
Weight (chassis only)
68 lbs (31 kg)
I N P U T C A P A B I L I T I E S
Type
Composite
S-Video
Component
Interlaced/Std def Y, Cr/Pr, Cb/Pb, S
Graphics
Progressive RGB/Progressive Interlaced Hi def
Y, Cr/Pr, Cb/PB
RGBHV (Progressive)
Digital RGB
Serial Digital
SD/HD-SDI (SMPTE 259M/292M)
DVI - High bandwidth
Dual - main
Dual - sub
*The main & sub dual DVI inputs can be used in
parallel to support dual-pipe 3D connectivity
Connector
BNC
4-pin mini DIN
BNCx4
BNCx5
D sub (15-pin)
DVI
BNC
DVI
DVI
Quantity
1
1
1
1
1
1
1
1
1
Digital Projection International (DPI), Texas Instruments’ first DLP™ partner and the orig-
inal innovator of the 3-chip DLP™ projector, proudly introduces the TITAN sx+ 3D family.
Weighing in at just 31 kgs/68 lbs. every TITAN 3D display employs the latest in sx+ dark
chip, 3-chip DLP™ technology to deliver up to 11,000 ANSI lumens and up to 4000:1
contrast. This award-winning compact chassis now includes six sx+ active 3D models.
All robustly built and extremely quiet, TITAN 3D projectors are the perfect imaging solu-
tion for vital immersive applications including: military simulation, scientific visualization,
medical and geological research, product engineering, commercial cinema and theme
park attractions.
In addition to the active 3D capability, TITAN 3D models also include DP’s new
FastFrame™ technology, a revolutionary combination of hardware and firmware that
reduces the artifacts and image blur typically associated with rapidly moving displayed
content. The benefits of FastFrame™ are especially important for simulation environments
such as commercial and military flight training, and other applications where maintaining
the visual integrity of high-speed imagery is vital.
For challenging 3D venues that require extreme mechanical rigging or precise mechanical
alignment, the TITAN 3D products can be ordered with DP’s RapidRig™ flying and stack-
ing frame. The RapidRig™ frames provide integrated pitch, roll and yaw adjustments,
simplifying installation and alignment accuracy. TITAN 3D models utilize the same lenses
employed across the rest of DPI’s TITAN and LIGHTNING product range, so optical
accuracy is always ensured.
Other key benefits of the TITAN sx+ 3D models include:
• High Bandwidth input >120Hz active stereoscopic DVI with no need for frame
doubling. This capability extends the dynamic range up to 16 bit for improved
contrast and color gamut. Both single-pipe and dual-pipe 3D sources are supported.
• Dual Flash Processing™ (DFP) – Enables distribution of 3D content via 60 Hz formats
by providing the option to frame-double the signal within the projector. When this
option is selected, the input signal, having been processed and re-sized to map to
the native resolution of the projector, will also be frame-doubled to 120 Hz, and the
doubled frames interleaved. This produces imagery with the low flicker characteristics
of a native 120 Hz source, but without the infrastructure costs associated with
distributing and switching ultra-high bandwidth signals.
• Projector electronics which provide an interface to drive an infrared transmitter to
synchronize switching glasses with active displayed frames. The user can elect either
to pass through an external sync pulse, or to use the reference generated internally
by the projector. Adjustments are provided to accommodate the phase and dead
time characteristics of different switching glasses.
• FastFrame™ technology, a revolutionary combination of hardware and firmware that
provides user adjustments to vastly reduce the artifacts and image blur typically
associated with rapidly moving display content.
• Minimal video delay from input to screen - as low as 1 frame.
• Eight user-selectable inputs, including HDCP-compliant DVI plus SD/HD-SDI.
• High bandwidth DVI inputs offer Single, Twin, Dual & Dual Twin DVI connectivity.
• Up to 16 Bit color for breathtaking image reproduction.
• DPI’s ColorMax™ calibration capabilities including enhanced seven-point color
correction for broader color space and precise color alignment.
• DPI’s CoolTek™ engineering, delivers the highest lumen performance with the lowest
power consumption, thermal (BTU) and noise level (dBA) output.
• MultiBlend™ – an advanced soft-edge capability for seamlessly meshing arrays of
projectors to create displays with ultra-high resolution or unusual aspect ratios.
• Intelligent Lens Mount (ILM) - provides the ability for the user to program up to 10
distinct presets for lens zoom, focus and shift. The ILM presets can be assigned and
automatically recalled, by source and input.
TITAN sx+ 3D Pro Series II displays - powerful tools for immersive large screen
applications - bringing the precision of Digital Projection to your venue.
sx+ Dual 3D