manualshive.com logo in svg

Digital Projection Mercury Quad Series, Инструкция по установке и быстрому запуску

Поделиться
Скачать
Digital Projection Mercury Quad Series Скачать руководство пользователя страница 69

page 61

Digital Projection Mercury Quad Series

Operating Guide

USING THE PROJECTOR

Rev A March 2017

Edge Blend menu

Use this menu to blend together images from an array of two or more projectors.
The feature feathers the light output of the projector within the edges that overlap with 

other projectors in the array: as a result, the overlapping edges are evenly lit and easily 

blend in with the rest of the image.

• 

Edge Blend

 

Enable and disable 

Edge Blend

• 

Align Pattern 

Add markers to the image showing the edges of the blend area and making the 

overlaps more visible to help adjust the physical position of the projectors in the array.

• 

Blend Width

 

Determine the width of the blended regions.

• 

Black Level Uplift

 

Adjust black levels to compensate if the blended regions appear brighter than the rest 

of the image.

• 

Reset

 

Reset all 

Edge Blend

 settings to their factory default values.

Notes

 When 

Edge Blend

 is set to 

Off

, 

all other edge blend settings are 

disabled.

  The picture in the blend region 

needs to be delivered to all 

overlapping projectors, which 

may require a special setup of the 

source.

  Some settings may be unavailable 

depending on other settings. For 

more information, see 

Possible 

Combinations Of Settings

 further 

in this guide.

Edge Blend

Align Pattern
Blend Width

Edge Blend

Black Le

v

el Uplift

Reset

Off

u

On

u

Содержание Mercury Quad Series



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды