X1 SERIES ELEVATOR
CONTROLLER
Quick Start Guide
LT-2464 21293 © 2021 Digital Monitoring Products, Inc.
MOUNT THE CONTROLLER
The metal enclosure for the X1 Series Elevator Controller must be mounted directly to
a wall, backboard, or other flat surface in a secure, dry place to protect the controller
from damage. It is not necessary to remove the PCBs when installing the enclosure.
Address the rotary on the module to 1.
CONNECT A CARD READER
The X1 Series provides direct 12 VDC output to the reader on the RED terminal
connection.
The elevator service company supplies traveling cable wires for the reader. Document
which numbered conductors are connecting to which terminals on the elevator
controller.
Terminal Name
Wiegand Function
OSDP Function
R1 & R2
12V+
DC +
W1 & W2
Data 1
B (485 +)
G1 & G2
Data 0
A (485 -)
B1 & B2
12V- (ground)
DC -
LC
LED Control
N/A
BC
Wiegand Buzzer Control
N/A
PRE-INSTALLATION
Warning:
This controller can not be installed without being in contact with the
elevator service company. This guide covers only what the elevator control
installer will be able to do.
