Wireless Router User Guide
42
Wireless Station Configuration
This section applies to all Wireless stations wishing to use the Wireless Router's Access Point,
regardless of the operating system which is used on the client.
To use the Wireless Access Point in the Wireless Router, each Wireless Station must have
compatible settings, as follows:
Mode
The mode must be set to
Infrastructure
(rather than Ad-hoc)
Access points only operate in
Infrastructure
mode.
SSID (ESSID)
This must match the value used on the Wireless Router. The default
value is
Wireless
.
Note! The SSID is case sensitive.
Wireless
Security
By default, Wireless security on the Wireless Router is disabled.
•
If Wireless security remains disabled on the Wireless Router, all
stations must have wireless security disabled.
•
If Wireless security is enabled on the Wireless Router, each station
must use the same settings as the Wireless Router.
Wireless Configuration on Windows XP
If using Windows XP to configure the Wireless interface on your PC, the configuration proce-
dure is as follows:
1. Open the Network Connections folder. (
Start - Settings - Network Connections
).
Figure 29: Network Connections (Windows XP)
2. Right-click the Wireless Network Connection, check that it is enabled (menu option says
Disable
, rather than
Enable
) and then select
View Available Wireless Networks
.
3. You will then see a list of wireless networks.
Содержание IP1006RR
Страница 2: ......
Страница 18: ...Wireless Router User Guide 14 User Name Password RAS Plan...
