Digital Juice EVO PRO Fluid Head, Руководство пользователя

Страница: 13 / 16

11
USER’S GUIDE
Cautions &
Warnings
• Always tilt the platform to horizontal and set the tilt lock to locked
position when changing the payload on top of the fluid head. Do
not rely on the tilt lock alone when platform is at an angle.
• When mounting the fluid head onto the tripod at a narrowed
stance, it is possible that the center of gravity of a tilted payload
will fall outside the footprint of the tripod, leading to instability.
Make sure the tripod legs are sufficiently spread and firmly
locked in place, using the ground level spreader and the mid-level
security chain, so that the center of gravity of the tilted payload
remains within the footprint of the tripod.
• Do not use solvent- or oil-based cleaners, abrasives or wire
brushes to clean dirt from the tripod or fluid head as these will
damage protective surfaces.
• Mount the EVO PRO Fluid Head only to standard 100mm-bowl
type tripods to avoid damage to the head and any camera gear
attached to it.
• Never disassemble any part of the EVO PRO or attempt to service
it, or warranty will become void.
• Store the EVO PRO in its carry bag in dry, room temperature
conditions. Do not expose to sun, extreme heat (above 110F) or
severe cold (below 25F) for long periods.
During normal operation of the EVO PRO Fluid Head, the only
cleaning required is a periodic wipe down with a lint-free cloth. If
any dirt accumulates on the unit, it may be removed with a semi-
stiff brush. You should also regularly clean the EVO PRO Tripod with
a clean damp rag or soft brush.
Use of the EVO PRO outdoors under adverse conditions may require
special care. The fluid head should be covered when not in use. Salt
spray and mud should be wiped or washed off using fresh water at
the earliest chance. Abrasive sand and dirt should be removed using
a semi-stiff brush or a vacuum cleaner. It is especially important
to keep grit and dirt away from locking levers and knobs on both
the tripod and fluid head, in order to ensure they continue to turn
smoothly and lock tightly.
Do not use solvents, cleaners, lubricants, polishes, abrasives or
wire brushes to clean the tripod or fluid head.
Transport and store the EVO PRO Tripod and Fluid Head in the
provided carry case whenever possible. Store in a dry place, away
from direct sunlight.
Maintenance
& Cleaning
(continued)