Digital Juice EVO PRO Fluid Head, Руководство пользователя

Страница: 10 / 16

8
USER’S GUIDE
Setup & Use
of the EVO PRO
Tripod System
(continued)
3. Place both pan and tilt lock levers in the locked position. To do
this, rotate the pan lock lever on the front side of the head to the
right (towards the right side of the head) to engage the lock
(41)
and rotate the tilt lock lever on the left side of the head upwards
(towards the back of the head) to engage the lock
(42) .
41 42
43
44
NOTE:
It is important that the
pan bar handle and any
camera accessories
such as lens, focus
control, viewfinder
or teleprompter, are
attached and in their
operating position
before balancing the
head. Any gear attached
or adjusted later can
throw the head off-
balance.
4. Turn both tilt drag knob and balance knob to the minimum
levels. For tilt drag knob (43) , this means turning the knob
forward (counterclockwise) to a setting below 1 on the scale
where knob will stop. For balance knob this means turning the
knob to the left (counterclockwise) towards the (-) symbol, until
knob will no longer turn
(44) .
5. Slide the quick-release plate with camera attached onto the EVO
PRO fluid head from the back (it will not insert from the front).
Adjust the position until the camera feels balanced on the head.
6. Holding the camera in a horizontal position with the pan bar,
release the tilt lock lever. Find the correct balance by sliding
the camera and plate back and forth until the camera does not
cause the fluid head to tilt forwards or backwards. Lock the quick
release plate’s slide lock lever on the right side of the head.