Digital Information Preproofer 740, Руководство по установке

Страница: 30 / 35

4
Assemble the System
Installation Steps
4-20 Preproofer – HW Installation manual
Preproofer IM749
8-12 EN
42.)
Disconnect the Y-Motor connector with 2 pins on the
Epson CPU Board.
(1) Y-Motor connector with 2 pins
43.)
Connect first 2 wire Male connector to the Y-Motor
female connector. Make sure red wire is connected to
the red wire.
44.)
Connect the second 2 wire Female connector to the
Y-Motor Male connector sitting on the CPU Board.
45.)
Route the cables for the upper printer through the
cable channel as shown.
1