Picture Porter
User’s Guide
5.1.2.
Remote control
When Picture Porter is connected to the TV, you can operate the device as you
normally do using the control panel on Picture Porter.
In addition, you can use the included remote control for added convenience. The
following diagram explains how to use the remote control.
The remote control layout is exactly the same as the button layout on Picture Porter.
Refer to
Sections
3 and 4
for details on how to use these controls.
Remote Control Layout
5.2.
Play Music through Stereo System
To play music files stored on Picture Porter through a stereo or set of external
speakers:
1.
Connect the audio connectors (colored white and red) to the audio input
ports on a stereo or set of external speakers.
2.
Connect the other end of the audio cable into either headphone jack labeled
‘Audio 1’ or ‘Audio 2’ on Picture Porter.
3.
You can now play the music files stored on Picture Porter through the stereo
or set of external speakers using the control keys on Picture Porter.
Note:
When Picture Porter is connected to the stereo system, use both the TV
volume control and the Picture Porter volume control to find the most suitable
volume setting.
Power Off
Enter/Select
Play/ Pause
Zoom in
Zoom Out
Selector/
Direction Keypad
Menu
Escape/Stop
Page 39
Revision 1.6