Digital Equipment RapidPrint 500, Справочное руководство

Страница: 86 / 192

Printing NetWare Host Setup
9 - 8
9.2.3 Configuring Rprinter
Configuring a RapidPrint 500 service as an rprinter device prevents any other users from using the
service. It will be tied to the rprinter node for as long as the node is running and pserver is execut-
ing. Only one rprinter node can be configured on the RapidPrint 500, but multiple ports on the
RapidPrint 500 can be tied to queues on that node.
NOTE: rprinter is also known as nprinter.
Before beginning rprinter configuration, you will need to know the name of the printserver pro-
cess you will be starting on the file server, and the name of the print service on the RapidPrint 500.
1. Set the rprinter printserver on the RapidPrint 500.
From the RapidPrint 500 local prompt, enter the Set/Define NetWare
Printserver
command, where pserver_name is the name with which the pserver
NLM/VAP/standalone program will be started (under Step 4 ).
Figure 9-20: Setting the Printserver
2. Create a print queue on the file server and associate it with the RapidPrint 500
services.
A. Under “Available Options,” select the Print Queue Information option and
press Enter.
Figure 9-21: Print Server Information Option
You will see a list of configured print queues on the file server.
B. Press Insert to create a new queue on the file server, type the new queue
name, and press Enter.
Figure 9-22: Queue Name Example
The name does not have to be related to the name of the RapidPrint 500
resources, but should be short and easy to remember.
C. Highlight the queue you just entered and press Enter to configure the
queue itself.
Local>> SET PROTOCOL NETWARE PRINTSERVER
pserver_name
Local>> DEFINE PROTOCOL NETWARE PRINTSERVER
pserver_name
Available Options
Change Current File Server
Print Queue Information
Print Server Information
New Print Queue Name: TESTQ