Digital Equipment RapidPrint 500, Справочное руководство, Страница: 148 / 192

Set/Define Server Node Limit
11 - 30
11.62 Set/Define Server Node Limit
Sets the maximum number of LAT service nodes about which the server will keep information. If
the new limit is less than the current limit and the service table is full, the number of nodes will be
slowly pruned down to the new value.
Restrictions You must be the privileged user to use this command.
Parameters limit
The server can be limited to between 0 and 200 hosts; the default is 50.
None
No limit is imposed.
Examples
Local> SET SERVER NODE LIMIT 6
See Also Show/Monitor/List Server ; Node Limit .
11.63 Set/Define Server Password Limit
Limits the number of failures allowed when entering the privileged password while attempting to
become the privileged user. After this number of tries, the port will be logged out. The user can
abort the password process by pressing Ctrl-Z instead of typing the password.
Restrictions You must be the privileged user to use this command.
Parameters limit
A value between zero and 100. If zero is specified, the port is never
logged out for too many password failures. The default is three retries.
None
Changes the retry limit to zero (no limit).
Examples
Local> SET SERVER PASSWORD LIMIT 10
See Also Set Privileged/Noprivileged ; Set/Define Server Privileged Password ;
System Passwords .
SET
DEFINE
 
 
 
SERVER NODE LIMIT
[ ]
limit
NONE
 
 
 
SET
DEFINE
 
 
 
SERVER PASSWORD LIMIT
[ ]
limit
NONE
 
 
 