Digital Equipment RapidPrint 500, Справочное руководство

Страница: 142 / 192

Set/Define Server Incoming
11 - 24
11.51 Set/Define Server Incoming
Allows or denies incoming LAT or Telnet connections and enforces password protection, if
desired. The Show Server command shows the status of incoming connection parameters.
Restrictions You must be the privileged user to use this command.
Parameters LAT
Enables incoming LAT connections only, and creates a new LAT service
that is used to log into the server.
Telnet
Enables incoming Telnet connections only. The status of incoming Telnet
also controls incoming Rlogin sessions from remote hosts. It also removes
any LAT- or Both-created service and the ability to log in using LAT.
Both
Enables incoming LAT and Telnet connections, and creates a new LAT
service that is used to log into the server.
None
Disables incoming LAT and Telnet connections (the default). It also
removes any LAT- or Both-created service and the ability to log in using
LAT.
Nopassword
Allows the establishment of incoming connections without prompting for
a password (the default).
Password
Causes the server to prompt for a password for all incoming connections.
Examples
Local> SET SERVER INCOMING TELNET INCOM PASSW
(sets up password protected Telnet logins)
See Also Set/Define Server Rlogin ; Show/Monitor/List Server ; System Passwords .
SET
DEFINE
 
 
 
SERVER INCOMING
LAT
TELNET
BOTH
NONE
NOPASSWORD
PASSWORD
 
 
 
 
 
 
 
 
 