Digital Equipment Pro-face PS-3450A Series, Справочное руководство, Страница: 10 / 103

Chapter 1 Setting Up Software
1-3
1.2 Setting Up an HDD with no Pre-installed OS
First, when you use a PS-A with no pre-installed OS, you will need to install either Windows
®
2000 or
Windows
®
XP. You also need to install any required utility software.
1.2.1 Setting Up the OS
Install your operating system. For the setup procedures about the OS, refer to that product’s installation
manual.
1.2.2 Setting Up the PS-A Dedicated Software
(1) Download the necessary drivers and utility software from the Pro-face support site “Otasuke Pro!”.
(2) Decompress the downloaded data, then the [Proface] folder has been created in drive C.
• Specify [Disabled] for the USB-Device29 and the Function7 of the BIOS when you
install commercial Windows
®
2000, using a USB CD/DVD-ROM drive.
• The PS-A unit supports Windows

2000 Service Pack 4 and Windows

XP Service
Pack 2. The PS-A unit performance cannot be guaranteed when any other
operating system is used.
• The setup requires a USB keyboard.
• For details about the drivers and utility software, refer to the following section.
• When decompressing the Touch Panel Driver (Mouse Emulator) [UPDD], designate the
[Proface] folder to save.
SEE
‹
Integrated Device Control Sub-Menu (page2-23)
URL http://www.pro-face.com/otasuke/
SEE
1.4 PS-A Dedicated Software (page1-12)