Digital Equipment Pro-Face PL-6700 43 Series, Руководство пользователя

Страница: 61 / 97

Chapter 5 - System Setup
PL-6700 43 Series User’s Manual 5-8
Suspend Option
When Auto Configuration Enable has been selected, this selection
cannot be used. The [Static Suspend] selection is factory set and
recommended for most users.
MODEM Use IRQ
Selections for this feature include [1],[2],[3],[4],[5],[6],[7]or[8]. The
[3] selection is factory set and recommended for most users.
FAN Control (CPU Fan)
The two selections available are [Disabled]or [Enabled]. The
[Disabled] selection is factory set and recommended for most users.
HDD Off After
Designates the period of time to elapse before the HDD's motor turns
itself OFF. The selections include [1Min]
→
[15Min], [1-
15Min]or[Disabled].The [Disabled] selection is factory set and
recommended for most users.
Doze Mode
Only after Auto Configuration has been set to [User Define] can the
Doze Mode be used. The [Disabled] selection is factory set and
recommended for most users.
Standby Mode
Only after Auto Configuration has been set to [User Define] can the
Standby Mode be used. The [Disabled] selection is factory set and
recommended for most users.
Suspend Mode
Only after Auto Configuration has been set to [User Define] can the
Suspend Mode be used. The [Disabled] selection is factory set and
recommended for most users.
COM Ports Activity
Designates if the COM Port is monitored or not. The two selections
available are [Disabled]or [Enabled]. The [Enabled] selection is
factory set and recommended for most users.
LPT Ports Activity
Designates if the LPT (Parallel) Port is monitored or not. The two
selections available are [Disabled]or [Enabled]. The [Enabled]
selection is factory set and recommended for most users.
HDD Ports Activity
Designates if the HDD (Hard Disk) Port is monitored or not. The two
selections available are [Disabled]or [Enabled]. The [Enabled]
selection is factory set and recommended for most users.
VGA Activity
Designates if the VGA Port is monitored or not. The two selections
available are [Disabled]or [Enabled]. The [Disabled] selection is
factory set and recommended for most users.
IRQ3-IRQ15
Designate if the COM Port is monitored or not. The two selections
available are [Disabled]or [Enabled].
5-2 System Parameters