Digital Equipment Pro-Face PL-6700 43 Series, Руководство пользователя

Страница: 58 / 97

Chapter 5 - System Setup
PL-6700 43 Series User’s Manual 5-5
Swap Floppy Drive
When two (2) floppy disk drives (FDD) are installed, setting this selection
to [Enabled] will cause the order of the A and B drives to be swapped. The
two selections available are [Disabled]or [Enabled]. The [Disabled]
selection is factory set and recommended for most users.
Boot Up Numlock Status
Designates the condition of the NumLock key at startup. The two
selections are either [On] or [Off]. The [Off] selection is factory set and
recommended for most users.
Gate A20 Option
The two selections available are [Fast] or [Normal]. When [Normal] has been
selected, Keyboard Control is used for Gate A20 control. When [Fast] is selected,
the Chipset is used. The [Fast] selection is factory set and recommended for
most users.
Memory Parity Check
Designates if a Parity Check is used for Parity Memory. The two selections
available are [Disabled]or [Enabled]. The [Disabled] selection is factory
set and recommended for most users.
Security Option
Designates the location of the Password Entry, [Setup], used during BIOS
setup, or [System], which is used during BIOS setup and Startup. When the
[Supervisor Password] or User Password] area's password has not been
designated, this setting is disabled. The two selections available are
[Disabled]or [Enabled]. The [Disabled] selection is factory set and
recommended for most users.
PCI/VGA Palette Snoop
When the PCI/VGA and the MPEG ISA/VESA VAG cards are both used,
this setting is set to [Enabled]. In all other cases, this should be set to
[Disabled]. The [Disabled] selection is factory set and recommended for
most users.
OS Select For DRAM >64MB
Select either [Non-0S2]or[OS2]. The [Non-OS2] selection is factory set
and recommended for most users.
Video BIOS Shadow
Designates whether Video BIOS ROM is expanded into RAM and used
from there (C0000-C7FFF). The two selections available are [Disabled] or
[Enabled]. The [Enabled] selection is factory set and recommended for
most users.
C8000-CBFFF Shadow to DC000-DFFFF Shadow
When the Expansion Board's ROM is placed in this area, this setting
designates if the ROM expands into the RAM area. The two selections
available are [Disabled] or [Enabled]. The [Disabled] selection is factory
set and recommended for most users.
5-2 System Parameters