Digital Equipment Pro-Face PL-6700 43 Series, Руководство пользователя

Страница: 32 / 97

PL-6700 43 Series User’s Manual 3-1
The User can install a variety of optional units and expansion boards made
by Digital in the PL, as well as a number of commercially available ISA-bus
compatible boards. This chapter describes both the products that can be
installed in the PL and how to install them.
Chapter 3 Chapter 3
Chapter 3 Chapter 3 Chapter 3
Installing Optional Units and Installing Optional Units and
Installing Optional Units and Installing Optional Units and
Installing Optional Units and
Expansion Boards Expansion Boards
Expansion Boards Expansion Boards Expansion Boards
1. Available Options and Expansion Boards
2. Installing Options and Expansion Boards
3-1
Available Options and Expansion Boards
Digital Electrical Corporation Optional Products
Name Model Description Installation Location
PL-EM220
32MB SDRAM Main memory
module for expansion.
Installed inside the PL.
DIM Module
PL-EM230
64MB SDRAM Main memory
module for expansion.
Installed inside the PL.
HDD Unit PL-HD200
Built-in type special purpose 2.5
inch HDD unit. Used when replacing the
existing HDD unit.
FFD Unit PL-FF200
20MB flash file disk with IDE
interface.
Installed inside the PL.
FDD Unit PL-FD200
PC/AT compatible 3.5 inch FDD
unit.
Installed inside the PL.
-5V/-12V
Power Unit PL-PW100
Provides -5V and -12V power to
the expansion slots. Allows each
of the 4 slots to draw up to
200mA.
Installed inside the PL.
CD-ROM
Unit PL-DK200 IDE compliant CD-ROM unit
(Includes special connection
cable) Attached to the
connector on the rear
side of PL.
Full-sized cover PL-FC200
Attached when ISA bus full sized
board is used in the expansion
slot.
Installed inside PL’s
Maintenance Cover.
IrDA Unit (under
development)
PL-IR100
IrDA (Ver. 1.0) compatible infrared
data transmission module.
Installed inside PL’s IrDA
cover.
• Since the PL-6700’s hard disk is a precision instrument, peri-
odic maintenance is recommended to insure its correct opera-
tion.