Digital Electronics GP-2401 Series, Руководство пользователя

Страница: 52 / 139

3-11
Chapter 3 - Installation and Wiring
GP-2401/2501/2601 Series User Manual
3.4 CF Card Installation and Removal
When using the GP Unit and a CF Card, follow the precau-
tions below:
• Prior to inserting or removing a CF Card, be sure to turn
the GP unit’s CF Card ACCESS switch OFF and to confirm
that the ACCESS lamp is not lit. If you do not, CF Card
internal data may be damaged or lost.
• While a CF Card is being accessed, NEVER turn OFF or
reset the GP, or insert or remove the CF Card. Prior to
performing these operations, create and use a special GP
application screen that will prevent access to the CF Card.
Refer to GP-PRO/PB III for Windows Tag Reference Manual (in-
cluded in the screen editor software package)
• Prior to inserting a CF Card, familiarize yourself with the
CF Card’s front and rear face orientation, as well as the CF
Card connector’s position. If the CF Card is not correctly
positioned when it is inserted into the Mulit Unit, the CF
Card’s internal data and the GP unit may be damaged or
broken.
• Be sure to use only CF Cards manufactured by the Digital
Electronics Corporation. GP unit performance cannot be
guaranteed when using another manufacturer’s CF Card.
• Once GP data is lost, it cannot be recovered. Since acci-
dental data loss can occur at any time, be sure to back up
all GP screen and CF Card data regularly.
• Be sure to follow the instructions given below to prevent
the CF Card's internal data from being destroyed or a CF
Card malfunction from occuring:
• DO NOT bend the CF Card.
• DO NOT drop or strike the CF Card against another object.
• Keep the CF Card dry.
• DO NOT touch the CF Card connectors.
• DO NOT disassemble or modify the CF Card.
CAUTIONS