Digital Electronics GP-2401 Series, Руководство пользователя

Страница: 28 / 139

GP-2401/2501/2601 Series User Manual 2-3
Chapter 2 - Specifications
* 1 The front face of the GP unit, installed in a solid panel, has been tested using
conditions equivalent to the standards shown in the specification. Even though
the GP unit’s level of resistance is equivalent to these standards, oils that should
have no effect on the GP can possibly harm the unit. This can occur in areas
where either vaporized oils are present, or where low viscosity cutting oils are
allowed to adhere to the unit for long periods of time. If the GP’s front face
protection sheet becomes peeled off, these conditions can lead to the ingress of
oil into the GP and separate protection measures are suggested. Also, if non-
approved oils are present, it may cause deformation or corrosion of the front
panel’s plastic cover. Therefore, prior to installing the GP be sure to confirm the
type of conditions that will be present in the GP’s operating environment. If the
installation gasket is used for a long period of time, or if the unit and its gasket
are removed from the panel, the original level of the protection cannot be guar-
anteed. To maintain the original protection level, you need to replace the instal-
lation gasket regularly.
2.1.3 Structural
3.
GP-2401 Series GP-2501 Series GP-2601 Series
Grounding
Ratings
*1
(For front panel of
installed unit)
Weight
1.7 kg (5.5lb) or less
Cooling Method
External
Dimensions
W215mm [8.46in]
x H170mm [6.69in]
x D60mm [2.36in]
W317mm [12.48in]
x H243mm [9.57in]
x D58mm [2.28in]
100
Ω
or less, or your country's applicable standard
Equivalent to IP65f (JEM 1030)
NEMA#250 Type4X/12
3.5kg (7.7lb) or less
Natural air circulation