Digital Check SmartSource Expert Micro Elite Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 30

Digital Check SmartSource Expert Micro Elite Скачать руководство пользователя страница 25

Installation & Operations Guide - SmartSource Expert Micro Elite

June 2019

8227 6059-001

Page 25 of 30

Cleaning the image cameras

Be especially careful when cleaning around the image cameras. The image cameras have glass faces which can be
easily broken if a metal probe is used.

The glass faces of the image cameras may acquire a build-up of dirt and paper dust from the passing documents, which
affects image quality. If streaks, lines or a loss of image quality are seen, the image cameras should be cleaned.

Open the image cover to expose the glass faces of the image cameras, as shown.

Clean the glass faces using a soft cloth moistened with water. For stubborn stains, a solvent such as isopropyl alcohol
may be used. Cleansing wipes pre-soaked with suitable solvent are available from the Digital Check Store,

www.digitalcheck.com

, part number 75-1804-907.

Ensure that any cleanser or solvent has been completely wiped off

or dried before closing the image cover.

Front Image

Camera glass

Rear Image

Camera glass

«
...
23
24
25
26
27
...
»

Содержание SmartSource Expert Micro Elite































Отзывы:

Нет отзывов