Digital Ally, Inc.
|
Status Indicators
7-1
FirstVu HD Operation Guide
|
860-00177-00 Rev J
Camera
DVR
DVR
DVR
VIBRATE
Power & Record
Powering ON
Alternating Flash
1 Pulse
Event Recording
On
Pulse
(Frequency
Configurable)
Standby or Standby Pre-Event
Memory Alerts
15 Minutes Remaining
1 Flash/
5 Seconds
1 Pulse /
5 Seconds
Battery Alerts
15% Charge Remaining
2 Flashes/
5 Seconds
2 Pulses /
5 Seconds
Charge in Progress*
Flash
Charging Complete*
On
Data Transfer
Transfer in Progress
Flash
Transfer Complete
On
Error
3 Flashes / 5 Seconds
3 Pulses /
5 Seconds
VuLink
Connected to VuLink
®
VuLink
®
will display a flashing LED when searching for
your FirstVu HD, and display a solid yellow LED when
connected to your FirstVu HD.
*The unit may be charged via USB cable with the power switch in the OFF position.
However, no LED indicators will be active while it is charging.
When in a Data Transfer stage, wireless communications with VuLink
®
are
automatically disabled. This prevents an accidental recording while docked.
Section 7
Status Indicators
LED Status indicators and
vibration pulses are used to
indicate the operational status of
the
FirstVu HD
.
The status indicators are located
on the top of the camera and the
DVR.
7.1 Normal Mode
