Digisol DG-FS4528P, Руководство по управлению

Страница: 856 / 973

C
HAPTER
41 | Quality of Service Commands
– 856 –
C
OMMAND
M
ODE
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
U
SAGE
Only one policy map can be assigned to an interface.
First define a class map, then define a policy map, and finally use the
service-policy command to bind the policy map to the required
interface.
The switch does not allow a policy map to be bound to an interface for
egress traffic.
E
XAMPLE
This example applies a service policy to an ingress interface.
Console(config)#interface ethernet 1/1
Console(config-if)#service-policy input rd-policy
Console(config-if)#
show class-map
This command displays the QoS class maps which define matching criteria
used for classifying traffic.
S
YNTAX
show class-map [ class-map-name ]
class-map-name - Name of the class map. (Range: 1-16 characters)
D
EFAULT
S
ETTING
Displays all class maps.
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
Console#show class-map
Class Map match-any rd-class#1
Description:
Match ip dscp 10
Match access-list rd-access
Match ip dscp 0
Class Map match-any rd-class#2
Match ip precedence 5
Class Map match-any rd-class#3
Match vlan 1
Console#