DigiPoS Millennium Technical Manual
Main BIOS Screen
Phoenix – AwardBIOS CMOS Setup Utility
f
Standard CMOS Features
f
Advanced BIOS Features
f
Advanced Chipset Features
f
Integrated Peripherals
f
Power Management Setup
f
PnP/PCI Configuration
f
PC Health Status
f
Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Esc : Quit
Ç
È
Æ
Å
: Select Item
F10 : Save & Exit Setup
Time, Date, Hard Disk Type..
Details
Standard CMOS Features
Frequency/Voltage Control
Standard settings like date, time, HDD, FDD etc.
Advanced Settings
Advanced CMOS Features
Load Fail-Safe Defaults
Advanced settings
Advanced Chipset Features
Advanced settings for the VIA chipset
Loads the Fail Safe default settings that were
programmed in at time of manufacture (Not Generally
Used as the settings are not OS specific and are only to
be used as a last resort)
Integrated Peripherals
Load Optimized Defaults
Settings for the onboard devices
Power Management Setup
Loads the optimised default settings that were
programmed in at time of manufacture (Not Generally
Used as the settings are not OS specific and are only to
be used as a last resort)
Controls what devices remain active when a
computer has been left on with no activity for a
set period of time.
Set Supervisor Password
PnP/PCI Configurations
Allows you to set IRQ’s to a specific configuration
such as Plug and Play or Legacy ISA.
Allows for the option of a password to be set so that a
user is prompted for a password when the computer is
switched on or rebooted
PC Health Status
Set User Password
Gives current voltage and temperature
measurements inside the DigiPoS
As above with the exception that access is restricted to
some of the BIOS settings.
Save & Exit Setup
Saves the changes you have made.
Exit Without Saving
Exits the BIOS without saving any changes.
Page 45 of 81
