4
1. Connect the monitor
using a VGA cable
3. Connect the network
cable.
5. Connect the video cable(s) to the video capture board for
analog and hybrid systems. (AH, PH systems only. AI systems
do not include expansion cards. )
2. Connect a USB device, such
as a keyboard or mouse.
4. Connect the power
cable(s).
3. Setting Up Your System
Copyright ©2011 DIGIOP, Inc. • Indianapolis, IN • tel: 800.968.3606 • fax: 317.663.2077 • support: 877.972.2522 • www.digiop.com
DIGIOP is a trademark of DIGIOP, Inc. All rights reserved.
PH Series Systems
AH Series Systems
Video In
CH17 - CH32
(AH only)
Sensors and Control Terminals
Audio In
CH9 - CH16
Video In
CH1 - CH16
(AH only)
Audio In
CH1 - CH8
Tx +
TX -
RX +
RX -
RS485
Terminals:
Control 1
Sensor 1
Sensor 2
Sensor 3
Sensor 4
Control 2
Control 3
Ground
Ground
Control 4
Video In
CH9 - CH16
Audio In
CH3 - CH4
(PH only)
Video In
CH1 - CH8
Audio In
CH1 - CH2
(PH only)
Sensor 1
Ground
Sensor 2
Ground
Sensor 3
Ground
Ground
Sensor 4
Relay 2
Ground
RS485 TRX +
RS485 TRX −
Ground
Relay 1
