76
Controlling Your System
4. Under Zoom / Focus, click + - to zoom in and adjust the focus.
5. Under Speed, click the radio buttons to select 1X, 2X, or 4X.
6. Click buttons 1~16 at the bottom of the window to enter presets for your PTZ camera.
NOTE:
Please refer to your camera’s instruction manual for a complete list of preset codes.
Setup
See “Remote Setup” on page 82.
Status
The Status window displays four types of information
about your DVR:
• System:
Displays Video Type, Software Version,
Hardware Version, and hard disk information (space
remaining, number of hard disks connected)
• Record:
Displays status of recording, type of
recording program, and repeat record (on/off)
• Network:
Displays network information for the
connected DVR.
• Bitrate:
Displays the rate of transmission for each
camera channel (in Kbps)
To view DVR status:
1. Click
to open the Status window.
2. Click the tabs to view different status information from your DVR.
Figure 22.3 Status Window
