57
Launching DigiClient
Connecting to a DVR
With your DVR now added to DigiClient, you can connect to the DVR to monitor and control the
system remotely.
To connect to a DVR:
1. From the DigiClient main window, click
.
2. Enter your
username
and
password
and click
OK
. Your DVR should appear in the list.
3. Select your DVR from the list and click
Connect
. Go to step 4.
OR
3a. Select your DVR from the list. If necessary, configure the following options:
When finished, click
Change
(settings for the DVR are saved). Click
Connect
.
4. Enter your 8-digit
DVR password
and click
OK
. See step 3a for information on saving your
DVR password.
NOTE:
Refer to the instruction manual of your DVR for details on setting and enabling
passwords.
Figure 17.2 DVR List window
• RS-232 / RS485
• Use IP Server
• Port number
• DDNS
• Domain Name
• Serial Port
• Baud Rate
• Password
• Description
