126
APPENDIX M: REMOTE VIEWING USING
INTERNET EXPLORER
Along with the DigiClient Remote Software, you can also connect to your system remotely using
Internet Explorer (version 7 or later recommended). Remote viewing through Internet Explorer
allows for basic viewing, searching, and playback.
NOTE:
Remote viewing is only compatible with Internet Explorer. Mozilla Firefox, Opera, Safari
and other browsers are not supported.
Configuring Internet Explorer
Prior to connecting to your system using Internet Explorer, we highly recommend configuring
Internet Explorer.
To configure Internet Explorer:
1. Open Internet Explorer.
2. From the main browser window, select Tools>
Internet
Options
.
3. Click the
Security tab
.
4. Click Trusted Sites from the available zones and then
click
Sites
.
5. In the text field, enter
https://www.digimerge.com/
VB300
and click
Add
.
6. Click
Close
.
7. From the Internet Options window, click
OK
.
Installing ActiveX
®
Prior to connecting to your DVR with Internet Explorer, you
must install the ActiveX plug-in.
To install ActiveX:
www.digimerge.com/VB300
2. When prompted, click the warning bar and select
Install ActiveX
(see figure 38.2).
3. In the new security window, click
Install
to Install
ActiveX (see figure 38.3).
Figure 38.0 Select Trusted Sites in Internet
Options
Figure 38.1 Add http
s
://www.digimerge.com/
VB300